Авторизация / Регистрация

[mindw0rk]

What PC u have?

[Bangel25_renamed_1238007_31052020]

RAM: 8 gigs
Graphics card: AMD Radeon HD 7700 Series
Processor: AMD FX(tm)-4100 Quad-Core Processor
Operating System: 64 bit


Not sure if you need anything else, but my guess it's something to do with the memory still because ICBINE 3 does not cause FPS loss.

[Stormforge_renamed_1238105_07062020]

Hello mindw0rk !

I took my time to create an account on this forum(even though I cant say a word Russian :D ) just becouse of this compilation and your work.

First of I would like to say I am big fan and really appreciate the HUGE amount of work you put into this compilation. I ve been enjoying it for several weeks now. The compilation worked like a charm from the start.
I also have a few questions, if you dont mind, I ve been poundering for some time when it comes to my own gameplay I would like to adjust slightly.

I was wondering to what extend is the compilation capable of further adjustment ? Can I modify any setting/mod in the SkyUI MCM- in game, fully ? What are the limitations ? I have quite a serious game save with few hours of gameplay into it I would not want to lose if I was to change something.

How about modifications to SKSE_Elys_Uncapper.ini ? What I had in mind in particular was changing it to 1.5 to 2 perk points per level ? Nothing serious.

I have also noticed something like unexpected resolution changes in between saves/loads during gameplay. However this could be just the UI fonts changing. Its difficult to say during gameplay( I would suspect 100px in width/height maximum)

Thanks alot for answers and good work !

Attaching my PC setup as a reference. Running around 60 FPS full HD.

Intel i7 6700k @ stock
Kingston HyperX Savage Black DDR4 16GB @ 3000MHZ
ASUS Z170-A
Asus R9 390X 8 BG DDR5

[TheSpiceIsNice_renamed_1238112_12062020]

hey mindw0rk, just wanna say thanks for creating one of the most stable mod packs I've ever played. While there are some strange bugs here and there, I don't think I've gotten one crash in the 50 or so hours of playing.

Also, do you think that you'll ever update this mod pack? There has been numerous updates to the large mods included in this pack, such as a new version of Frostfall and a completely new version of SkyUI. Utility mods such as EnbBoost have also been updated to newer versions. There's also been a large amount of new mods I would consider checking out, like including HDT clothing and hair, along with the people of skyrim mod.

As for performance, I've have a decent 60fps in caves, around 40-50 in the wild, and it'll drop down to 30fps in heavily populated cities.

The rig I have is
i5-4400
AMD R9-290
16gb RAM

[Felipe Marcelino_renamed_1236901_24052020]

This pack is compatible with this mod? http://www.nexusmods.com/skyrim/mods/68406/?

If is compatible, what i need doing after install this mod?

[Shloma_renamed_1238176_01102020]

Ребят а где можно скачать ПОСЛЕДНЮЮ версию the journey, а то я натыкаюсь на кучу всяких разных версий, а какая последняя не знаю, желательно торрент вместе с игрой сразу.Так же интересно есть ли русский язык. Заранее спасибо.

[mindw0rk]

Сообщение от Stormforge:

I also have a few questions, if you dont mind, I ve been poundering for some time when it comes to my own gameplay I would like to adjust slightly.
I was wondering to what extend is the compilation capable of further adjustment ? Can I modify any setting/mod in the SkyUI MCM- in game, fully ? What are the limitations ? I have quite a serious game save with few hours of gameplay into it I would not want to lose if I was to change something.

You can modify mods through MCM and uncapper as much as you like, it wont break anything. Just make sure you know what youre doing.

Сообщение от TheSpiceIsNice:

Also, do you think that you'll ever update this mod pack? There has been numerous updates to the large mods included in this pack, such as a new version of Frostfall and a completely new version of SkyUI. Utility mods such as EnbBoost have also been updated to newer versions. There's also been a large amount of new mods I would consider checking out, like including HDT clothing and hair, along with the people of skyrim mod.

I might update it some day, but dont have time and desire now. You can always update mods yourself having backup of default Journey installation in case. Some updates like Interesting NPCs are as easy as overwriting files and it will work np. Mods that have patches like Frostfall might cause issues. Just update and test it.
Same about adding other mods. I tested few HDT mods before release and decided not to include them, there were some issues.

Сообщение от Felipe Marcelino:

This pack is compatible with this mod? http://www.nexusmods.com/skyrim/mods/68406/?

If is compatible, what i need doing after install this mod?

Cant say, Winterhold was changed drastically. Try it and tell us.

Сообщение от Shloma:

Ребят а где можно скачать ПОСЛЕДНЮЮ версию the journey, а то я натыкаюсь на кучу всяких разных версий, а какая последняя не знаю, желательно торрент вместе с игрой сразу.Так же интересно есть ли русский язык. Заранее спасибо.

Последняя на английском здесь: http://rutracker.org/forum/viewtopic.php?t=4791644

Русский репак поищи по тегу: "skyrim the journey 1.1 gmax"

[Shloma_renamed_1238176_01102020]

Большое спасибо.

[Bangel25_renamed_1238007_31052020]

I don't understand why my game freezes - it never froze or crashed if I the ENB on, it was just really slow. I'm trying different things to fix it but not progress so far :/

Is there a way to hit Shift + F12 and then going to my SweetFX preset instead?

[riflepoet_renamed_1237613_30052020]

Hey guys, I lost my stealth indicator and the enemy health bar. Kept playing with different iHUD settings, but cant find a combo that works. Is there a known good way to get the stealth indicator back and get the enemy health meter back? Otherwise, amazing mod, thank you so much for making this.

[Felipe Marcelino_renamed_1236901_24052020]

Two perk doesn't work properly. "Bastion" & "Arcane Artisan". Someone have a fix for the bug? What version is SkyRe in pack? Thx

[Haracone_renamed_1239856_01072020]

Сообщение от mindw0rk:

You can modify mods through MCM and uncapper as much as you like, it wont break anything. Just make sure you know what youre doing.



I might update it some day, but dont have time and desire now. You can always update mods yourself having backup of default Journey installation in case. Some updates like Interesting NPCs are as easy as overwriting files and it will work np. Mods that have patches like Frostfall might cause issues. Just update and test it.
Same about adding other mods. I tested few HDT mods before release and decided not to include them, there were some issues.



Cant say, Winterhold was changed drastically. Try it and tell us.



Последняя на английском здесь: http://rutracker.org/forum/viewtopic.php?t=4791644

Русский репак поищи по тегу: "skyrim the journey 1.1 gmax"

Здравствуйте, подскажите, пожалуйста, в сборк The jorney не видно персонажа, аргонианина по имени Из-Самых-Глубин-Глубин. В мире его не нахожу. Через консоль его тоже не респавнит. Можете подсказать в чем проблема?

[Петров1994_renamed_1241238_30052020]

Добрый день. Начал играть с данной сборкой.Все очень нравилось. Но с сегодня при выходе из дома Ярла В Морфале 100% вылет.Выполнил квест связанный с убийством главного вампира пошел сдавать. Когда подходил заметил баг. Один из дозорных застрял на месте(т.е шел вперед и возвращался в исходное положение).Я подумал может само пройдет.Зашел в дом сдал квест.Выхожу из дома вылет.Пробывал раз 10 100% вылет. Возможно ли это исправить? Может сбросить настройки и тд. Не очень хочется начинать заного.

[mindw0rk]

Сообщение от Петров1994:

Добрый день. Начал играть с данной сборкой.Все очень нравилось. Но с сегодня при выходе из дома Ярла В Морфале 100% вылет.Выполнил квест связанный с убийством главного вампира пошел сдавать. Когда подходил заметил баг. Один из дозорных застрял на месте(т.е шел вперед и возвращался в исходное положение).Я подумал может само пройдет.Зашел в дом сдал квест.Выхожу из дома вылет.Пробывал раз 10 100% вылет. Возможно ли это исправить? Может сбросить настройки и тд. Не очень хочется начинать заного.

Неужели нет более раннего сейва? Попробуй переименовать папки Textures и Meshes, выйти, сохраниться и вернуть названия обратно. Можешь так же попробовать отключить мод better vampires

[Patrickjfountain_renamed_1241291_29052020]

Hi, the script engine is running slow, is their a fix to speed it up please :), thanks in advance

[mindw0rk]

Сообщение от Patrickjfountain:

Hi, the script engine is running slow, is their a fix to speed it up please :), thanks in advance

You can turn off error msg in Frostfall options. Strange that you see them, if you use my save it is turned of by default

[Patrickjfountain_renamed_1241291_29052020]

Cheers man

[KarmaGG_renamed_1241428_08062020]

Hello everyone!

Mindw0rk your mod compilation looks amazing! I just wish I could get it to work

Whenever I launch the game it starts for a second and then immediately crashes. This happens regardless of whether I use SKSE_Launcher.exe, SCM.exe, or TESV.exe. I have tried 3 fresh installs of Skyrim and followed your instructions exactly every time and have gotten the same problem.

I have been trying to read through this forum for any troubleshooting help but I cannot read Russian and translating is slow work. So far, based off of some of the posts I've seen here I have tried:

Updating VCredist libraries
Updating GPU and Motherboard drivers
Updating DirectX/Windows
Running SKSE_launcher.exe in compatibility mode (Windows 7)
Running TESV.exe in compatibility mode (Windows 7 & Windows 8)

My system specs are:
i5 4690k CPU
EVGA Geforce GTX 970
8GB DDR3 RAM

And I am running the latest version of Windows 10 Home edition.
If anyone here has any ideas I would be very grateful! Thank you!

[mindw0rk]

You have all DLCs right? Since if you miss any (besides texture pack - its not needed), game will crash on startup.

Ive seen people had problem with Win10 running Skyrim but they had createdxgifactory2 error msg. Was fixed by copying d3d11.dll and dxgi.dll from C:\Windows\System32 to Skyrim folder (with overwrite).

[Eldar Doyle_renamed_1241535_15062020]

Hey Mindw0rk, I have a problem. I get into the game, try to load your save, and right when it tries to go into the game, just crashes. What do?

[KarmaGG_renamed_1241428_08062020]

Сообщение от mindw0rk:

You have all DLCs right? Since if you miss any (besides texture pack - its not needed), game will crash on startup.

Ive seen people had problem with Win10 running Skyrim but they had createdxgifactory2 error msg. Was fixed by copying d3d11.dll and dxgi.dll from C:\Windows\System32 to Skyrim folder (with overwrite).

Correct. I have Dawngaurd, Dragonborn, and Hearthfire all installed. (I do not have the 'Skyrim High Resolution Texture Pack' installed.)
I was receiving no error message but I copied those files over anyways just in case, however the same problem persists.

Whatever is causing the crash is not creating any logs in Microsoft Event Viewer for me to look at unfortunately. I am able to see Skyrim running in the task manager for about 1 second before it just disappears.

Thank you for taking the time to help.

[KarmaGG_renamed_1241428_08062020]

Update: I found a log file (log.log) that had the following in it:

"full path: C:\Program Files (x86)\Steam\steamapps\common\Skyrim\
redirecting CreateDevice
initialising shader environment
D3DXCreateEffectFromFile failed
try to use "C:\Program Files (x86)\Steam\steamapps\common\Skyrim" for shader files".

I looked into this and found another person who fixed the issue by simply removing the file "d3d9.dll" so I did the same and the game launches fine now. I'm only about 20 minutes in but everything seems to be running smoothly.

Out of curiosity Mindw0rk, what is "d3d9.dll" for? Am I missing out on something by having removed it or do you think it'll cause trouble down the road when it's not there?
Also, my game controller (xbox360) doesn't seem to work in game. Is it possible to play with a controller in your compilation or must I use mouse and keyboard?

Thanks again for all your hardwork putting this together! I look forward to putting a lot of time into your build!

[ReilyH_renamed_1241565_09062020]

Hey, i have spent the last week getting your modpack to work, and it does. Its fantastic . but the save you have provided, the ragnar one. the bed is missing in the prison cell. ???? i love what you have done with this game though.

[mindw0rk]

Сообщение от KarmaGG:

Out of curiosity Mindw0rk, what is "d3d9.dll" for? Am I missing out on something by having removed it or do you think it'll cause trouble down the road when it's not there?

This file is needed for ENB to work. If you remove it you wont have graphics like on screenshots, will be vanilla colours. Also Im not sure game will remain stable since memory patch works along with ENB.

I think Ive read earlier that you need to use Injector version of ENB with Win10 (in Journey there is wrapper ver). Download latest ENB version here: http://enbdev.com/mod_tesskyrim_v0305.htm
And try to copy files from Injector folder to Skyrim folder.

[KarmaGG_renamed_1241428_08062020]

Сообщение от mindw0rk:

This file is needed for ENB to work. If you remove it you wont have graphics like on screenshots, will be vanilla colours. Also Im not sure game will remain stable since memory patch works along with ENB.

I think Ive read earlier that you need to use Injector version of ENB with Win10 (in Journey there is wrapper ver). Download latest ENB version here: http://enbdev.com/mod_tesskyrim_v0305.htm
And try to copy files from Injector folder to Skyrim folder.

Yes it turns out the game will not remain stable without "d3d9.dll", it runs fine as long as I'm in the prison cell or another building, but as soon as I step outside the game crashes :(

I downloaded and attempted to use the injector version as you recommended but that seems to be causing the same issue as the wrapper version, it still crashes on startup.